How Do I Connect My Wi-Fi Router?
Getting a new router up and running isn’t a simple matter of taking it out of the box and plugging it in. But setting up a home network doesn’t have to be intimidating, even if you’re a newbie. These days, router manufacturers have made it easier than ever to get connected to your Wi-Fi network quickly and easily. But just because you’ve plugged everything in and it seems to be working doesn’t mean your network’s performance and security are as good as they could be. Follow these basic steps to properly configure your wireless router and optimize your wireless network and connectivity.
Note that these steps assume that you have already found the right router for your home. If you’re still looking to make a purchase, check out our wireless router buying guide, which also features the best products we’ve tested.
Placement and Setup
Before getting started, you need to consider where you’ll place your router. Finding an open space toward the center of your residence is the best way to ensure optimal coverage. Be aware that walls and floors will impede Wi-Fi signals, so the more obstructions you have between your devices and your router, the weaker (and potentially slower) the signal will be. Try to avoid proximity with large metal, glass, brick, or concrete objects.
First, you need to connect your router to your modem. For this you’ll need an Ethernet cable, which you’ll want to plug into the WAN (wide-area network) port on your router’s rear face. This port might look slightly different from router to router, but it will usually have a distinct color from the other ports and be labeled “WAN,” “Internet,” or something similar. From the WAN port, connect the other end of the Ethernet cable to the Ethernet port on the back of your modem. Ensure your modem is turned on, and you’ll be ready to connect to the internet. Then, of course, you need to plug your router into a wall outlet and turn it on.
Many modern routers can be configured completely from your smartphone. Manufacturers will have their own unique setup app, so consult your router’s quick-start guide to ensure you download the right one. Not all routers have a mobile app, though. Some have a dedicated website URL that loads the router’s internal configuration page. You can find this URL by connecting your computer to any of the router’s LAN ports via Ethernet cable and entering 192.168.1.1 or a similar address (as specified by the router’s documentation) into your browser search bar.
The first step to get your network up and running will be to set up a username and password. If you happen to have a pre-owned router, the username and password can be reset to factory defaults by holding a recessed button somewhere on the router (usually the back). Often, these defaults are something like “admin” and “admin,” which every would-be hacker knows, so make sure to change these right away. Be sure to use a secure password that includes a mix of uppercase and lowercase letters, numbers, and symbols.
How Do I Configure My Router?
With the username and password set, you can proceed to configure your router’s settings. As with cooking a dinner, there’s no “right” way to install a router, and every model is likely to have its own unique steps, depending on its features. Because of this, trying to describe every possible configuration path here would be exhausting and pointless. We strongly recommend consulting your router’s manual for specifics.
That said, we do have a few points of advice:
Use the easy setup wizard. Most routers provide some form of brief setup routine that asks for little more than the SSID and password. If in doubt, start with this. (The SSID is your router’s Wi-Fi name. It might be something like “asus” or “netgear” out of the box, but feel free to change this to something creative, like “FBI-surveillance-van.”) You can always log back into the router’s app or browser page to access more advanced options for fine-tuning your experience.
Use the WPS button to connect Wi-Fi devices. If you’ve ever paired two Bluetooth devices, such as a smartphone with headphones, then you already have the basic understanding of how this works. Let’s say you want to connect a Windows 10 laptop to your router. On your laptop, you’ll see your router’s SSID pop up on the list of visible wireless networks in Windows. When you select the SSID and attempt to connect, Windows will prompt you to enter the network security key, which is a needlessly technical way of saying password. If you’ve done a proper job with your security and made a password with randomized uppercase and lowercase letters, numbers, and symbols, you’ll have utterly forgotten it and not want to mess with typing it in ever again. Instead, press the WPS button on your router. You should have at least a minute for the router and laptop to find each other and successfully pair. Keep in mind that WPS only works with Windows and Android devices.
When in doubt, let the router do it. “Auto” configuration tools are your friend. In more than 20 years, I’ve never had a reason not to let the router manage my IP addresses with Dynamic Host Configuration Protocol (DHCP), a protocol that automatically assigns IP addresses to devices. Just because you can change something doesn’t mean you should. At least during the setup and early-use stages, go with the auto settings.
Is It Better to Connect to the 2.4GHz or the 5GHz Band?
On the client device side, all other things being equal, 5GHz connections will provide better performance at short ranges than 2.4GHz. This is because 5GHz, while somewhat faster, can’t travel as far or transmit through some objects due to that band’s shorter wavelengths. The 2.4GHz band tends to have more congestion and fewer channel options. That said, if you want to keep using 2.4GHz, consider experimenting with the channel selection. “Auto” usually does a decent job of hopping around the channel options and finding the best one, but if you’re struggling with client connections, try manually setting the channel to 1 or 11. The 2.4GHz band has a total of 11 channels you can switch between to avoid interference, with channel 6 usually being the default. When you select a given channel, there’s usually some signal spillover. So, selecting channel 2, for example, will often spill traffic onto channels 1 and 3. Thus, switching to the extremes of 1 or 11, the farthest points from the default of 6, can sometimes ensure the best-performing connections.
After the “easy” setup, some routers will walk you through a few extra steps, such as establishing parental controls (features that allow you to filter certain types of content) and automatically updating the router firmware. After these preliminaries, proceed to “wireless setup,” or a similarly named tab/screen to activate your Wi-Fi network. Once your network is activated, you can connect any device to it and start browsing the web.
Taking It to the Next Level
With most routers, simply activating your network and connecting to the internet is only scratching the surface of what you can do. While a tab name like “advanced settings” may seem a bit intimidating, the menus contained here often allow you to control some of your router’s most helpful features. We’ll cover some of the most compelling items below.
Quality of Service (QoS)
QoS is one of the most useful features for online entertainment. It allows you to select and prioritize the upstream and the downstream traffic on your network, which can provide a performance boost for your favorite streaming service or online game. Most routers will have a tab in their app/configuration page dedicated to traffic monitoring. Navigate to this and find the QoS tab. Turn QoS on, and then you can prioritize certain services, such as online games or video streaming. You can also prioritize devices on the network. Years ago, this was usually done by supplying the device’s unique MAC address and setting a priority level for that device. These days, vendors like Netgear are increasingly supplying more intuitive, graphical approaches to the same idea, as in the Manual Prioritization screenshot below.
QoS options can also allow you to see how your total bandwidth is being distributed by device, so you can spot anyone grabbing more than their fair or desired share.
These days, most traffic is download in nature, especially with multimedia streaming. If you find your streaming services pausing to buffer every so often, try using QoS to prioritize their traffic. However, in general, only gamers need to worry about upstream prioritization.
A guest network is handy to have if you’d prefer to keep all the data and files on your personal network out of unapproved hands. To set one up, go to your router’s app/configuration page and navigate to the wireless settings. Most routers have guest networks disabled by default, so there will usually be a page to set it up here. Confirm the network’s name and password and the network will be set up.
We strongly recommend applying at least WPA2 encryption to your regular Wi-Fi network, but you may want to leave your guest network “open” for easier access. While convenient, this might also encourage connections from neighbors and stray people parking on your curb. Make extra sure to limit guest network access privileges, such as which band they can use or what hours the network is active. You may also want to limit the guest network to either the 2.4GHz or the 5GHz band, but not both.
It can be useful to know how to see what traffic goes through your network, as is the ability to put a limit on said traffic. If either of these two features interests you, navigate to your router’s advanced settings menu. There will usually be an option called traffic monitor, traffic meter, monitor traffic, or something similar. Enable this feature and you’ll be able to observe your router’s traffic. In some routers you can also choose to limit incoming traffic (downloads), outgoing traffic (uploads), or both. Not all routers have a traffic-monitoring feature, but there are a plethora of services online that can do it for you, including Solarwinds RTBM or PRTG.
Internet oldsters might remember the days before Dropbox, when transferring large files between systems required jumping through several hoops with dedicated file-transfer protocol applications. FTP apps may have fallen out of common use, but the technology can still be a handy way to transfer lots of files without dealing with cloud services.
FTP servers are only available to routers that have at least one USB port. The first thing you’ll need is a USB storage device, such as an external hard drive, plugged into your router. Next, make your way to the advanced settings on the app/configuration page and find a tab called USB Storage, USB Settings, or something similar. Once in that tab, click the checkbox for “FTP via internet” or similar. Your USB device will now be available to users on your network. If you would like to be the only one to access the USB device, you can modify the read and write access to be admin-only.
Some routers will have you configure read and write access for specific folders. Simply click “new folder,” “select folder,” or something similar, and navigate to the desired folder on your USB device. Select the folder and click apply changes.
MAC Address Filtering
Think of a MAC (media access control) address as a universally unique name for any network device. The address is tied to the device hardware. Some routers allow you to set a list of specific MAC addresses that can (or can’t) access your network. It’s like blacklisting or white listing what devices can access your LAN.
To do this, find the MAC filter under the advanced settings tab. Dual- or tri-band routers will typically have you select which band the filter will apply to, and some routers will have you select whether the entered MAC address will be the only one accepted onto the network or the only address rejected from it. Once you’ve set your preferences for those options, the last step is to find the MAC addresses on the devices you’d like to filter and type them in.
For mobile devices such as phones or tablets, the MAC address can be found by accessing your device’s settings and navigating to the About Phone tab. From here, some devices might have a tab titled Status, where the MAC address can be found, while others have it readily available in the About Phone section. On a Mac or PC, navigate to your device’s network settings page and open the network and sharing center. Click on your Wi-Fi connection and look for Details or Properties. This area will display a myriad of information, including your device’s “physical address,” another term for MAC address. (On a Mac, it’s called “Wi-Fi Address.”)
Parental control, at a minimum, lets you establish time limits for when each allowed device (identified by MAC address) can be on the network. So if your kid has a bad habit of using devices long after bedtime, but you don’t want to constantly play the bad cop who has to police where and when devices get turned in every night, no problem.
First use MAC address filtering to make sure that only approved devices can connect to your router. Then use parental controls to make sure that those allowed devices can only connect within approved hours. It only takes a few minutes to set up, and, like having a well-configured router in general, will cure innumerable headaches and make sure your household runs much more smoothly.
Anybody can get an internet connection up and running in a few minutes by using your router’s quick start guide, but most models hide lesser-known treasures in their setup menus. If you want to get the most value possible out of your router investment, take the extra time to explore these advanced options. And if you’re still on the market for a new router, consider going beyond the box’s features list and the product’s spec sheet. Download the manual, dig into these advanced options, and see which features will deliver the most value in your environment. Once you’re up and running, test your internet speed. And if you need more guidance, check out our advanced hacks: 10 Tips to Speed up Your Wi-Fi and 12 Tips to Troubleshoot Your Internet Connection.TOPPROMOTED STORIES
Tech Savvy and Enthusiast, Android Lover … Can help on Tech-related issue because is a passion to me